HAR Adhesive: Manual Hot Melt Applicators and ITW Dynatec Hot Glue Hand Applicators

Manual (Hand-held) Hot Melt and Adhesive Applicators
		ITW Dynatec DG II Hot Melt Hand Applicator The Rotary Swivel Configuration- The ROTARY SWIVEL is useful when the hot melt hose is connected at the bottom of the hand applicator. The movement of the applicator can control the hose position. The Ball Swivel Configuration- The BALL SWIVEL is useful when the hot melt hose is connected at the top of the hand applicator and the applicator is suspended from the hose or a tool balancer. The Spiral Spray Nozzle Configuration- A variety of bead and spiral spray nozzles are available for applications that are straight or at a right angle to the trigger. The Right Angle Bead Nozzle configuration- Right angle bead nozzle

		Dynamini /DGII Hand Applicator Configured System CONFIGURED SYSTEM CONSISTS OF: Dynamini TM Adhesive Supply Unit Hot-Melt Adhesive Hose DG II TM Hand Applicator Bead Nozzle for the BeadDG II TM or Swirl Adapter, Nozzle and Cap for the SwirlDG II TM Swirl Air Kit for the SwirlDG II TM The DG II Hot Melt Hand Applicator Features: Rotary swivel or ball swivel with top or bottom hose connection Ergonomic handle with a clear sight line to the nozzle tip Easy to change cartridge-style heater and sensor Two or four finger trigger with built-in trigger lock DG II Hand Gun Specifications: Electrical - 80 Watts at 120 or 240 VAC 1 Ph 50/60 Hz Maximum Temp - 450 F (232 C) Maximum Adhesive Pressure - 1000 psi (70 bar) Maximum Adhesive Viscosity - 80,000 cp The configured system provides flexibility and allows for the use of a variety of bead and spiral spray nozzles that are available for applications that are straight or at a right angles to the trigger.
	Hot Melt Applicator MS 80 • 120 Volt • Capacity - 3 oz./80 ml • Adjustable temperature control to 375°F • Melt rate 1 – 2 lb. per hour Other models available • Bulk Spray / Extrusion • High Temperature Extrusion		Hot Melt Applicator MS 150 • 120 Volt • Capacity - 5 oz./150 ml • Adjustable temperature control to 375°F • Melt rate 3 – 5 lb. per hour
	HB 220 – ½” General Purpose • 248°F - 428°F adjustable operating temperature • Mechanical stroke limitation controls amount of adhesive applied • Trigger is adjustable to fit operator’s hand comfortably • Integrated on / off switch • Includes extra nozzle and case Other models available • ½” High Temperature • ¾” High Volume • ½” High Volume
	PUR Spray / Extrusion • 120 Volt • Capacity - 10 oz. PUR and other thermoset hot melt cartridges • Adjustable temperature control 175°F to 390°F • Melt rate 2 lb. per hour depending on glue