MS 200 Hot Melt Manual Applicator Glue Gun

banner image
MS 200 Hot Melt Manual Applicator Glue Gun

The industrial glue gun processes hot melt adhesive in form of 43mm sticks, granulates and pillows.

It offers a large 250ml capacity with fast adjustable temperature settings for bulk adhesive. The MS200 has an ergonomic handle with quality proven success over a long period of time. The MS200 does not require compressed air and it is ready to be used in as little as 5 minutes. Watch the video at the bottom of this page to see how it works!

The MS200 industrial hot melt glue gun features:

  • One thermostat controls all temperature settings up to 390°F
  • Accommodates stick or bulk adhesives
  • Suspension of the unit over a work-bench or on an assembly line is facilitated by the provision of an eyehook, to which a spring balance can be attached
  • Features a drip-free dispensing nozzle
  • With certain hot melts, one trigger can provide single runs of up to 25 feet
  • No cleaning is necessary
  • As opposed to slug guns, more adhesives can be dispensed at any time as the total hot melt volume is in liquid form

Technical specifications include:

  • Weight: 1220g / 2.7 lbs
  • Power supply: 120V / 50Hz
  • Power consumption: 600W
  • Current consumption: 2.6A
  • Degree of protection: I
  • Class of protection: IP 30
  • Temperature control: Thermostat
  • Temperature limitation: Temperature controller
  • Heat-up time: approx. 5 minutes
  • Gross tank capacity: 250 ml / 8.4 oz
  • Conveying system: Mechanics
  • Length of electric cable: 1.8m / 6ft
  • Recommended melts: Hot-melt granulate, pillows and 43mm (1.7") sticks
When you are ready to order, you can contact us directly or you may visit our eBay store for a convenient option to purchase the MS 200 Hot Melt Manual Applicator Glue Gun for $695.00  by clicking the following link: MS200 Industrial Hot Melt Glue Gun - No Compressed Air Needed

Interested in learning more? Find out our latest specials on manual hot glue applicators, go to our eBay store or contact Technical Sales Manager for HAR Adhesive Technology, Equipment Department at 440-786-7185 or just take a moment to complete our Request Information Form and we call you back right away.

 

Watch the following video to see a demonstration of how our MS200 hot melt manual applicator glue gun works:

Did you know the MS 200 Hot Melt Manual Applicator Glue Gun from HAR Adhesive is the same as the Champ™ 600 Bulk Hot Melt Glue Gun from GLUE MACHINERY CORPORATION?

Compare the MS 200 to the Champ™ 600 and you will quickly notice that the only real difference other then the color, is the price. Besides the cost, both of these hot melt glue guns are the same. 

MS 200 Hot Melt Manual Applicator Glue Gun from HAR Adhesive
Cost: $650 + Shipping

Champ™ 600 Bulk Hot Melt Glue Gun from GLUE MACHINERY CORPORATION.
Cost: $750 + Shipping